Reflex SuperShell Front Toe Bar

The Reflex SuperShell Front Toe Bar is constructed with carbon fiber and includes, inside stainless steel front toe bar, 4 screws and locking nuts.
The Toe Bar is for the SuperShell Bindings 1.0, 2.0, 3.0 series only.

WARNING:

THE REFLEX BINDING IS A HIGH PERFORMANCE BINDING AND IS DESIGNED FOR EXPERT SKIERS ONLY.

IT SHOULD BE CUSTOM FIT TO THE USER AND SHOULD NOT BE USED BY OTHERS FOR WHOM IT WAS NOT FITTED.

IF THE CHART IS NOT RESPECTED FOR THE RELEASE, IT MAY NOT RELEASE IN SOME FALLS THAT COULD RESULT IN SERIOUS INJURIES TO THE ANKLE, KNEE OR LEG.

BE SURE THAT YOU USE THE CORRECT SIZE OF BINDING.

INSPECT YOUR PLATE, SCREWS AND RELEASE SYSTEM TO BE SURE THAT THERE ARE NO CRACKS OR BREAKS IN THE PRODUCT AND THAT THERE ARE NO LOOSE SCREWS AND THE RELEASE IS PROPERLY SET.

WATER SKIING CAN BE DANGEROUS. IT EXPOSES YOU TO THE RISK OF DEATH OR SERIOUS INJURY FROM IMPACT WITH WATER OR FROM IMPACT WITH THE SKI DURING A FALL.