REFLEX SUPERSHELL 8DC HARDSHELL BINDING
The Reflex SuperShell 8DC is changing the world of water ski Hardshells. It’s the first hardshell binding system with no plate. The DC version allows having the hardshell directly in contact with the ski.
It improves the connection, the responsiveness, and also feeling of the skier. A 3M Transparent film is included to protect the ski.The release mechanism 930 DC is screwed in the inserts of the ski thanks to a new design set-up. The arm’s connecting points are located 3mm lower to compensate for the thickness of the plate so the mechanism locks and works the exact same way as before.
The new DC front toe cup is also screwed directly in the inserts of the ski. The new shape of the toe cup is more aero and hydrodynamic than the standard version with the plate. Inside the front toe cup there is an anti-slick and anti-vibration rubber used in the aerospace industry. This rubber will be in contact with the boot to improve the connection and the experience of skiing.
Less material, less weight.
REMEMBER TO MEASURE YOUR FOOT TO DETERMINE THE CORRECT BINDING AND LINER SIZE![]()
WARNING:
THE REFLEX BINDING IS A HIGH PERFORMANCE BINDING AND IS DESIGNED FOR EXPERT SKIERS ONLY.
IT SHOULD BE CUSTOM FIT TO THE USER AND SHOULD NOT BE USED BY OTHERS FOR WHOM IT WAS NOT FITTED.
IF THE CHART IS NOT RESPECTED FOR THE RELEASE, IT MAY NOT RELEASE IN SOME FALLS THAT COULD RESULT IN SERIOUS INJURIES TO THE ANKLE, KNEE OR LEG.
BE SURE THAT YOU USE THE CORRECT SIZE OF BINDING.
INSPECT YOUR PLATE, SCREWS AND RELEASE SYSTEM TO BE SURE THAT THERE ARE NO CRACKS OR BREAKS IN THE PRODUCT AND THAT THERE ARE NO LOOSE SCREWS AND THE RELEASE IS PROPERLY SET.
WATER SKIING CAN BE DANGEROUS. IT EXPOSES YOU TO THE RISK OF DEATH OR SERIOUS INJURY FROM IMPACT WITH WATER OR FROM IMPACT WITH THE SKI DURING A FALL.
We will include insert screws for this item when shipping it to you!
